Decorative Blade Decoupage

Designer: Amanda Brown
-----------------
Category: Home Decor
Size or dimensions Varies
Skill level: Beginner
Transform ordinary objects with your favourite fabrics! Use OLFA’s decorative blades to cut fabric pieces, then layer them with decoupage medium for a seamless-looking finish. It’s a simple technique with endless creative possibilities!

When I was a kid, I remember going to our local fabric store for classes. There would be 15–20 of us, ranging in age, descending on the store in full chaos. I have vague memories of all kinds of projects. Some involved sewing, but most didn’t.
As someone who has taught kids to sew, I now understand why they tried to keep us away from the sewing machines. Their sanity depended on it!
The one project that has stayed with me all these years was covering a plastic swan in fabric.
The first time I saw the swan, my mind was blown. The fabric appeared to completely encase the swan, fitting tightly over all its curves with no obvious seams or interruptions. I remember having MAJOR doubts about my ability to pull off something that looked so complicated.
Then I discovered that it was possibly the easiest project ever!
We were sent into the store and told to find a fabric with a small, tossed print. The important thing was that the design had no obvious direction, so the fabric could be rotated and the pattern would still look right.

Then we were handed a pair of pinking shears and told to go to town, cutting the fabric into small-ish rectangles.
From there, we simply glued the fabric pieces all over the swan, taking care to smooth each piece down so it laid flat against the curves.
And that was it.

The secret to making the finished swan look so seamless was really in two simple choices: the fabric and the edges of the pieces.

A tossed, non-directional print meant that the pieces could be rotated in any direction without disrupting the design. And the zigzag edges created by the pinking shears helped disguise where one piece ended and the next began.

For this project, we're giving this childhood technique an OLFA upgrade! Instead of wrestling with pinking shears, we'll use OLFA decorative blades to quickly create fabric pieces with decorative edges. With several blade designs to choose from, you can even experiment to see how the different edges change the finished look.

Materials:
• Fat Quarter of a small toss print
• Fabric Decoupage medium such as Mod Podge
• Paint brushes
• Item to cover such as a plant pot, wooden blanks etc.
Tools:
• Stainless Steel Scallop Blade SCB45-1
or
• Stainless Steel Pinking Blade PIB45-1
or
• Stainless Steel Wave Blade WAB45-1
• 45mm Ergonomic Rotary Cutter, RTY-2/DX
• 12" x 17" Folding Cutting Mat FCM - 12x17
Step 1: Prepare the Handle and Blade

We are using an Ergo handle for this project because it is the only handle designed to work with the decorative blades.
The large plastic washer is placed between the blade and the handle. This creates the necessary clearance for the blade to rotate freely. I swapped out the plastic washers so it’s easier to see the different placements of the washer.
Step 2: Cut the Fabric
Install the décor blade of your choice on your 45mm Ergo handle.

First, cut your fabric into strips. Then subcut the strips into rectangles of varying sizes, with the longest edge measuring no more than 2".

Don't worry about making the pieces identical. In fact, varying the size and shape of the pieces helps create a more natural, uninterrupted appearance when the fabric is applied.
Step 3: Apply the First Pieces

Using a paintbrush, apply decoupage medium to a small area of the object you are covering.
Place a piece of fabric over the coated area and smooth it down, making sure the fabric is flat and free of wrinkles or bubbles.
Step 4: Build Up the Fabric

Brush a thin layer of decoupage medium over the top of the fabric.
While the medium is still wet, place the next piece of fabric so that it slightly overlaps the edge of the previous piece. Smooth it into place, then brush another thin layer of decoupage medium over the new piece.
Continue working in small sections, overlapping the fabric pieces as you go.
Step 5: Cover the Entire Piece

Continue repeating the process until the entire piece is covered.
Depending on the shape of your project, you may find it easier to cover the sides first and then move on to the top. Allowing the fabric on the top to overlap the fabric on the sides can help create a more cohesive finished look.
Don't worry about making every piece line up perfectly. The small pieces, overlapping edges and non-directional fabric pattern work together to disguise the individual pieces.
Step 6: Add the Final Coat

Allow the piece to dry for 12 hours.
Once it is dry, apply another coat of decoupage medium over the entire surface. Allow the piece to dry completely.
Step 7: Experiment With the Décor Blades

On a set of wooden coasters I repeated the process using each of the décor blades to see if the different blades produced noticeably different results. From left to right we have pinking, wave and scallop blades.

Because these coasters have a consistent shape, I also experimented with using strips of fabric rather than cutting the fabric into small rectangles.


This worked particularly well on the uniform shape of the coasters and gave me another way to experiment with the technique.

Overall I would say any of the decorative blades would work but I think I with the fabrics I selected the pinking blade worked the best.

Designer Marcia Izabel Marchiori also did her version which you can find here:
